VEHICLE SAFETY INSPECTION AND TRACK REQUIREMENTS:

Performing an inspection of your vehicle is mandatory. You will be required to fill a form with the following requirements. You assume responsibility for the overall mechanical soundness of the vehicle you will be driving at the track day

NOTICE: Effective 7/21/2021 Participation of electric vehicles has been suspended until WHRRI obtains specialized equipment to deal with electric Vehicle emergencies.

• - Helmet Requirement - Helmets are required. SNELL 2015 or newer
• - Convertible Requirement - Convertibles without a factory seat back roll hoop / deployable roll protection / roll bar or cage / removable hard top (Miatas) must drive in the novice group
• - Driver Side Window - The driver side window will be required to be rolled down while on track to allow point to pass
• - Tire Treads - Check to make sure that your tires are not chording, do not have any blemishes, and the treads have sufficient depth (if not slicks)
• - Torque Lug Nuts - Ensure the lug nuts are torqued to spec
• - Wheel Bearings - Listening for grinding or humming noises from the wheel can be an indication of a bad wheel bearing. It is also worthwhile to review push on the tires to try and shake the wheel relative to the suspension to see if there is any looseness
• - Engine Fluids / Electricity - Leaking fluids on the track can cause a shut down, which means less track time for everyone. Low fluid levels could be harmful to your vehicle. Check engine oil, power steering fluid, and brake fluid levels. Don't forget to fuel up before coming to the track.
• - Battery Secured - Please check to ensure the battery is sufficiently secured for track usage
• - Brake Lights - Ensure brake lights work
• - Seat Belts - Ensure seat belts work and will securely hold all passengers
• - Driver's Side Floor Mat - Driver’s floor mat must be removed
• - Empty Trunk - Trunk must be empty, including spare tire (or sufficiently secured)