CSCC Winter AutoCross 1 (2020) requirements on Dec 6, 2020 (437289) | MotorsportReg.com

This event is over! Can we show you some more events nearby?

CSCC Winter AutoCross 1 (2020)

Event Requirements

This event was cancelled Nov 28, 2020. Can we show you some more events nearby?
Everyone Works

 When you are not driving or in the staging area you are expected to work as a track marshal.

Do Not Pollute The Grounds

 This includes activities that might spill hazardous materials onto the grounds. For example, refueling.

Bring a Tarp 

While your vehicle is in the paddock area it must be parked on a tarp. 

Bring a Helmet

 Helmets must be worn by all occupants of the car while the the car is on the track.

• FIA 8860-2004
• FIA 8860-2010
• FIA 8859-2015
• Snell 2015 SA, or 2015 M
• Snell 2010 SA, 2010 SAH, or 2010 M
• SFI Foundation 31.1/2015
• SFI Foundation 31.1/2010
• ECE R22.05 ECE 22.05 (expiry: ten years after date of manufacture as noted on
unaltered, helmet label)

(PLEASE NOTE: DUE TO COVID-19 PANDEMIC loaner helmets are NOT available at the event. YOU MUST BRING YOUR OWN HELMET)

Winter Tires Only - for events on the Lake.

All season, all weather, and summer tires are not permitted when Ice Racing on the Lake. 

Studded Winter Tires  - for events on the Lake. (Not recommended for gravel events)

Studded tires produced by a tire manufacturer (such as the Nokian Hakkapeliitta 9), that are DOT approved for use on public roads may be used. These tires must retain, the original amount and type of stud installed at time of manufacture and must not be modified.

Tires in which studs are installed subsequent to the manufacturing process may also be used and the following conditions must be met.

  • (a) Studs must protrude no more than 3.5mm from the tread face, and meet the Tire stud Manufacturers Index (TSMI) specifications on size 12, 13, 15 or 16. Stud construction shall have a single base flange, a cylindrical body, and carbide tip with maximum diameter of 2.5mm.
  • (b) The studs must be mounted in DOT tires that are designated by the manufacturer as studdable and are produced with moulded holes for the purpose of stud retention.
  • (c) There may only be a maximum of 130 studs per tire, regardless of tire size.
  • (d) Adhesive may be used to affix the stud into the tire.
  • (e) Homemade, competition, specialty, off road or custom studs are not permitted. 
Noise / Exhaust

All vehicles must have an exhaust system installed including a muffler that generates less than 85db as per local bylaws. Vehicles operating above 85db may be refused entry or asked to leave. We will be monitoring the sound levels at the request of the town.

Other Rules 

Each event is held under the spirit of the 2020 Canadian National Autoslalom Regulations.

Registration closed