TSCC 2018 Autocross School @ Danville Airport requirements on Apr 14, 2018 (302962) | MotorsportReg.com

Tech opens at 8:00AM
Tech Closes Promptly at 9:30AM

Your car should be teched BEFORE the drivers meeting. To pass tech, you must:

• Clean out any loose items in the car (including the trunk): things like cell phones cables, garage door openers, loose change and such.
• Have car # and Class clearly marked on the side of the vehicles (NOT on the windows)
• The battery has to be properly secured.
• If your floor mats are not physically attached to carpet, they will have to be removed. We don’t want the floor mat to bunch up under the brake or gas.
• Hubcaps and center caps on wheels should be removed. If your hubcaps mount to the wheel and are held in place by the lug nuts, then they can stay on, otherwise they should be removed.
• Have a SNELL approved helmet, 2000 or newer (M-rated or SA-rated). Don't worry, if you don't have one we have loaners available.

It is your responsibility to:

• Check basic fluids such as oil, coolant, and brake.
• Make sure you torque the lug nuts to manufacturer's recommended tightness.
• Make sure you have no active leaks on the motor, transmission or diff. Oil on the track is a bad thing.
• Check tire pressure. If you don’t know what to set it to, a good starting point is typically 35 psi.
• You WILL experience greater than normal tire wear. Your tires MUST be serviceable, meaning they have appropriate tread, no chords showing, etc.