MTD Mini Lapping Day requirements on Jun 26, 2020 (805988) | MotorsportReg.com

This event is over! Can we show you some more events nearby?

MTD Mini Lapping Day

Event Requirements

Registration closed June 24, 2020 11:59 PM at 2020-06-24T21:59:00-0700 Registration ends June 24, 2020 11:59 PM at 2020-06-24T21:59:00-0700 Registration opens June 11, 2020 12:00 AM at 2020-06-10T22:00:00-0700 Registration runs from June 11, 2020 12:00 AM to June 24, 2020 11:59 PM

Age requirements:

Riders must be at least 18 years of age with a valid motorcycle endorsement.

Gear Requirements:
- Undamaged full-face helmet with face shield 
- Gauntlet gloves with leather protecting the palms and fingers.
- Riding boots at least 8" that fully cover the ankle.
- We suggest you use a chest and back protector.
- One or two piece leather suit required. Two piece suits must have 360 degree zipper.
- Please carry your In Case of Emergency information with you on the track. This info would include: your full name, blood type, current medications, allergies and emergency contact person’s name and phone number. I.C.E. info cards are not required. But, are highly recommended.
- Knee and toe sliders that emit sparks are prohibited.
- No crude or offensive images or verbiage.

All gear must be in good condition, free of holes and have padding in the shoulders, elbows and knees.

Motorcycle Requirements:
- All Bikes must have crash protection 
- All bikes must have plastic bar ends or plastic wrapped Bark busters
- All bikes much have folding pegs
- All bikes must have rubber or other protective means on pegs
- Tires must be in good condition as determined by the technical Inspector. Must have street style tires, knobby tires are not allowed
- 103db maximum
- Water, water wetter, engine ice and other non ethylene glycol types of coolant only.
- Must have catch cans for fuel, oil, and coolant overflows 
- All bikes must have an operating and marked engine kill switch on the handlebars. Dead man tethers are allowed and are suggested.
- All bikes must have a self-closing throttle
- All bikes must have fully operational front and rear brakes.
- Kick-start levers (if originally fitted) are allowed to remain on the machine however they must be secure to keep them from swinging out.
- Glass and plastic lenses must be removed or taped over (headlights, tail lights, turn signals, mirrors, etc).
- Accessory type items (cameras, etc) are deemed safe only if secured in a visible, approved manner (safety wire). Using only aircraft nuts, locknuts, Locktite or similar                   compound is not acceptable.
- Clutch and Brake levers must have either at least a 1/2” ball on the end, or a rounded point deemed safe by The Technical Inspector.
- No crude or offensive images or verbiage.
- The following items must be safety wired, or secured in a manner approved by the Technical Inspector 
   Oil Drain Plug
   Oil fill cap
   Radiator Caps
   Axle Nut(s)
   Master clip link
   Any bolt that retains any fluid.

Open GP Bikes
Let's keep it simple for the first day. Open GP is anything from 50cc to 200cc. Just be mindful of the smaller displacement bikes if you're on higher hp bike. 


Remember track days are not races. There is no reason to make a dangerous pass. All reports of dangerous riders will be taken very seriously. Do not “stuff” other riders into turns. If you are stuck behind a group of slower riders and are getting frustrated, please come into the hot pit lane and let the Marshall know you want some space. You will then be released back on to the track.

If any rider violates any of the rules laid out by Midwest Track Day, LLC. they may be required to leave. If so, no refunds will be given to the rider in violation.

Registration closed June 24, 2020 11:59 PM at 2020-06-24T21:59:00-0700
Registration opens June 11, 2020 12:00 AM at 2020-06-10T22:00:00-0700

To register, select one of the following options and continue...

Sign in Create free account