CASC-OR Regional Autoslalom - Event 7 - OMSC requirements on Sep 2, 2018 (802723) | MotorsportReg.com

Helmets:

• Helmets meeting the following standards are approved for use in Autoslalom:
• Snell 2015 SA or 2015 M
• Snell 2010 SA, 2010 SAH or 2010 M
• Snell 2005 SA or 2005 M
• FIA 8860-2004, SFI Foundation 31.1A, 31.2A or 31.1/2005
• Snell 2015 M, 2010 M or 2005 M rated helmets are not acceptable for vehicles equipped with a roll cage. These drivers require a helmet which meets one of the FIA, Snell SA, SFI or BSI standards listed above.
• Helmets may be either open faced or closed face. They must be in good condition both inside and outside and never subjected to a crash or other severe impact.

Car Numbers:

• All vehicles must display numbers and class letters on both sides, which must be readable by Timing & Scoring, Course, and Grid workers at all times.
• Only one set of numbers and class letters may be visible while the vehicle is running.
• Each digit making up the number must be a minimum 15 cm high and 2.5 cm wide throughout, tape or shoe polish in an contrasting colour is acceptable.
• Example of a properly identified vehicle