CASC-OR Regional Autoslalom - Event 5 - OMSC requirements on Jun 29, 2019 (394972) | MotorsportReg.com

Helmets:

• Helmets meeting the following standards are approved for use in Autoslalom:
• Snell 2015 SA or 2015 M
• Snell 2010 SA, 2010 SAH or 2010 M
• ECE R22.05
• FIA 8860-2018, 8860-2010, 8860-2004, 8859-2005
• SFI Foundation 31.1/2015, 31.1/2010
• Snell 2015 M, 2010 M or ECE R22.05 rated helmets are not acceptable for vehicles equipped with a roll cage. These drivers require a helmet which meets one of the FIA, Snell SA or SFI standards listed above.
• Helmets may be either open faced or closed face. They must be in good condition both inside and outside and never subjected to a crash or other severe impact.

Car Numbers:

• All vehicles must display numbers and class letters on both sides, which must be readable by Timing & Scoring, Course, and Grid workers at all times.
• Only one set of numbers and class letters may be visible while the vehicle is running.
• Each digit making up the number must be a minimum 15 cm high and 2.5 cm wide throughout, tape or shoe polish in an contrasting colour is acceptable.
• Example of a properly identified vehicle